Durovis - Dive Board

Dive Board

« Previous
1
Next »

Print only central divider?

by jboss on Apr 24th, 2015 15:01 PM

Hi,

I somehow lost the divider part that avoids crosstalk between the two parts of the screen and I am planning on printing it. But after downloading the stl file I notied that in that file the divider is attached to the rest of the Dive, whereas in the purchased version it is a separate part that fits into a slot in the top of the DIve holder.

Is there an stl file for the divider that fits in the slot?

jboss

Posts: 9

Joined: 08.12.2014

Re: Print only central divider?

by smmworld on Aug 29th, 2022 08:06 AM

SMM Panel Pakistan Your post is such a great topic, I'm amazed. Normally, I browse your blogs and keep up to date with the knowledge you provide, but today's blog is really remarkable. smmworld

smmworld

Posts: 485

Joined: 18.07.2022

Re: Print only central divider?

by jennikim266 on May 22nd, 2023 05:45 AM

[color=#000000][size=4]Your comments on the forum are very reasonable, hope you add comments to the ara ara meaning website for us to improve further, and thank you for your comments.[/size][/color]

jennikim266

Posts: 12

Joined: 04.08.2022

Re: Print only central divider?

by SMM Store on Aug 11th, 2023 11:34 AM

[size=3]Great post, I want to thank you for this informative read; I really appreciate sharing this great post. Keep up the good work! [/size][color=#000000][size=2][font=Calibri, Arial]Indian SMM Reseller Panel[/font][/size][/color]

SMM Store

Posts: 80

Joined: 09.08.2023

Re: Print only central divider?

by marcux on Sep 19th, 2023 11:11 AM

[color=#374151][size=3][font=Söhne, ui-sans-serif, system-ui, -apple-system, "Segoe UI", Roboto, Ubuntu, Cantarell, "Noto Sans", sans-serif, "Helvetica Neue", Arial, "Apple Color Emoji", "Segoe UI Emoji", "Segoe UI Symbol", "Noto Color Emoji"]It appears that you are dealing with a 3D printing situation where you want to print a separate divider that fits into a slot in a Dive holder, but the available crackscut file combines the divider with the rest of the Dive. To print a separate divider that fits into the slot, you'll need a modified STL file that separates the two parts. Here are some steps you can take:[/font][/size][/color]
[ol]
[li][left][color=var(--tw-prose-bold)]Check the Original Source:[/color] If you purchased or obtained the Dive holder from a specific source, such as a manufacturer or distributor, it's a good idea to check with them first. They might have the STL file or 3D model for the separate divider available for download or purchase.[/left]
[/li]

[li][left][color=var(--tw-prose-bold)]Modify the STL File:[/color] If you are proficient with 3D modeling software, you can attempt to modify the existing STL file to separate the divider from the rest of the Dive. You would need to import the STL file into a 3D modeling program (e.g., Blender, Autodesk Fusion 360) and then use the software's editing tools to create the separate part.[/left]
[/li]

[li][left][color=var(--tw-prose-bold)]Seek Online Communities:[/color] There are online communities and forums where 3D printing enthusiasts share and discuss 3D models. Websites like Thingiverse, MyMiniFactory, and PrusaPrinters have extensive libraries of user-generated 3D models. You can search these platforms to see if someone has already created a separate divider STL file that fits your Dive holder.[/left]
[/li]

[li][left][color=var(--tw-prose-bold)]Contact 3D Modelers:[/color] If you can't find a suitable STL file online, you can consider reaching out to 3D modelers or designers who offer custom 3D modeling services. They can create a specific STL file for the separate divider based on your requirements.[/left]
[/li]

[li][left][color=var(--tw-prose-bold)]DIY Separation:[/color] Depending on the complexity of the Dive holder and divider, you might attempt to physically separate them by using tools and techniques, but this may not always yield the desired results, especially if the parts are intricately designed.[/left]
[/li]

[/ol]
[color=#374151][size=3][font=Söhne, ui-sans-serif, system-ui, -apple-system, "Segoe UI", Roboto, Ubuntu, Cantarell, "Noto Sans", sans-serif, "Helvetica Neue", Arial, "Apple Color Emoji", "Segoe UI Emoji", "Segoe UI Symbol", "Noto Color Emoji"]Before proceeding, ensure that you have the necessary permissions to modify or reproduce the 3D model, especially if it's a proprietary design. Additionally, consider the tolerances and measurements to ensure that the separate divider fits correctly into the slot in the Dive holder.[/font][/size][/color]